Evaporative Cooling
Service & Mainentance

Our Packages Include…

• Check flashings around unit to make sure they are watertight.
• Look for any potential water leaks from internal and external parts of unit.
• Make sure the drain is not blocked.
• Remove the panels from the unit checking for any damage to the filter.
• Check water distribution hoses and channels.
• Check filters for wear and sagging aspen pads or cracked Celdek.
• Check the water level and that the water supply is on and working correctly.
• Check operation of water valve and/or solenoid.
• Check pump operation is normal.
• Check motor and run it through from high to low speed.
• Check controller operation and cable connections.
• Re-fit all panels and secure them to the unit, run cooler through water cycle.
• Record type, brand, age, colour and size of cooler for future reference if parts are required into the future.
• Inside house check controller.
• Advise on any parts require to have cooler work optimally.
• Drain any water sitting inside of tray.
• Clean the water tank and check operation of the drain valve.
• Clean inside the cabinet removing any cobwebs, dust, pollen and dirt.
• Fill the tank and wash the cabinet thoroughly.
• Run the unit through a cycle to make sure it is operating as designed.
• Set the correct water level inside the unit Make sure unit is leak free while cycle is running.
• Re-instate panel on side of unit. Run the appliance and check is operating correctly.